Overall salvage of the wreck of Jbb Rong Chang 8 sand ship in Malaysia
Project introduction:
The ship is a sand suction ship, which ran aground on the way to the sea area of Malacca in March 2018. The overall salvage operation began in May 2018 and was completed in June of the same year.
Vessel information:
Shipowner | Rongchang Shipping Sdn Bhd | ||
Position | Mapo, Malaysia | ||
Water depth | 40m | ||
Total length | 121.8m | Profile width | 18.8m |
Profile depth | 8.8m | Gross net load ton | 6200T |
- Last：JBB YU HANG 258 Overall salvage of the sunken Malaysian sand ship
- Next：Participate in the disassembly and salvage of the wreckage of thorco cloud bulk carrier in Indonesia
-
Overall salvage of the wreck of Jbb Rong Chang 8 sand ship in Malaysia
-
Clearance and salvage of stern end of WAKASHIO ship in Mauritius
-
Disintegration and salvage of the sunken ship Jinmei
-
Participate in the disassembly and salvage of the wreckage of thorco cloud bulk carrier in Indonesia
-
Basic principle of sunken ship s [2022-05-16]
What is the treatment principle of sunken ship salvage underwater engineering? The basic principle of underwater engineering is chemical grouting. Chemical grouting is to inject the pressure polymer m
-
Environmental requirements for u [2022-05-16]
Underwater cutting is another underwater project. With the rapid development of economy, underwater cutting is more and more widely used. What are the environmental requirements of underwater cutting?
-
Precautions for offshore wind po [2022-05-16]
Wind power hoisting is a very important task, especially in offshore wind power hoisting, we must do a good job in all aspects of protection. For wind power hoisting, we generally need to pay attentio